PYLE Audio TV Mount PSW128ST User Guide

INSTALLATION GUIDE  
Item No.:PSW128ST  
UP  
UP  
Thank you for choosing our product  
Pyle Audio  
1600 63rd st , Brooklyn, NY, 11204  
(718)236-8000  
TV Size Range: 23"~37"  
Maximum Weight Capacity: 35kg/77lbs  
Warning  
Adjustable angle: 0°5°  
This product contains small items that could be a choking hazard if swallowed. Keep  
these items away from young children!  
Locked by locking bar on the bottom  
www.pyleaudio.com  
1.Make sure these instructions are read and completely understood before attempting  
installation. If you are unsure of any part of this installation, contact a professional  
installer for assistance.  
MADE IN CHINA  
CAUTION  
2.The wall or mounting surface must be capable of supporting the combined weight of  
the mount and the display; otherwise the structure must be reinforced.  
3.Safety gear and proper tools must be used. A minimum of two people are required  
for this installation. Failure to use safety gear can result in property damage, serious  
injury or death.  
This product was designed to be installed on wood stud walls and solid concrete walls.  
Before installing make sure the supporting surface will support the combined load of the  
equipment and hardware. Never exceed the Maximum Load Capacity. This product is  
intended for indoor use only. Use of this product outdoors could lead to product failure or  
personal injury.  
-8-  
 
Part 3-MMountinng the flat panel screen  
Part 1aa-Woodd SStud Mouunting  
Hook the top of brackets(2) onto the top flange  
of wall plate(1). Then swing the screen down.  
Use wall plate(1) as a template, make sure it is level, and mark four  
mounting holes along the center lines of the wood studs. Drill four 3/16”  
(5mm)dia.holes 2(50mm) deep. Level wall plate(1) and attach to wall  
with four long bolts(F) and four washers(H). Tighten screws firmly. Do not  
overtighten.  
1
NOTE: Always use an assistant or mechanical  
lifting equipment to safely lift and position  
heavy equipment.  
2
Use the Locking bar(3) to prevent the TV from being removed or  
accidentally knocked off of the wall plate. When the locking bar half  
insertes into the wall plate , you can use the rotating rod(4) to make it  
fully inserted.  
UP  
UP  
Stud finder  
Wood stud  
H
3
2(50mm)  
F
5
Φ3/16(5mm)  
-3-  
-6-  
 
Part 2-Atttachingg BBrackets TTo Screen  
Part 1b--Concrette Wall MMoounting  
Center brackets vertically on back of screen. Select the small(A or B) or  
medium(C or D). Attach brackets to screen using four selected screws and  
four square washers(E) at the top and bottom of each bracket. Tighten screws  
firmly. Do not overtighten.  
Level wall plate(1) and use it as a template to mark four holes. Drill four 3/8”  
(10mm) dia. holes 2(50mm) deep. Insert four anchors(G) into holes and  
secure wall plate with four long bolts(F) and four washers(H).Tighten screws  
firmly. Do not overtighten.  
Square washer(E)  
E
2(50mm)  
A-D  
Medium hole for  
M5 and M6 screws  
Φ3/8(10mm)  
Small hole for  
M4 screws  
Concrete Wall  
G
H
F
-5-  
-4-  
 

RCA Car Video System DRC97983 User Guide
RCA DVD Player DRC279RE User Guide
Ruby Tech Switch GS 1148L User Guide
Runco Projector VX 2i User Guide
Samsung Clothes Dryer DV339AE User Guide
Samsung Microwave Oven SMH8187 User Guide
SanDisk Computer Drive 80 11 01543 User Guide
Sanus Systems TV Mount LL11 User Guide
Sanyo Air Conditioner CH3672R User Guide
Sanyo Digital Camera VPC S1080 User Guide