PYLE Audio TV Mount PSWLE82 User Guide

Part 55-Adjjusting diisplay and using cord management  
Route cords along articulating arms using cord management clips.  
Articulating arms can be adjusted to position display into desired location.  
Use wrench(8) to tighten and loosen the tension screw. Do not overtighten  
or overloosen to make the screws come out.  
INSTALLATION GUIDE  
Item No.:PSWLE82  
180°  
180°  
180°  
-5°~15°  
Wrench  
4x4  
Wrench  
5x5  
5°  
Thank you for choosing our product  
TV Size Range: 37"~55"  
Maximum Weight Capacity: 35kg/77lbs  
VESA: 700X500  
Pyle Audio  
1600 63rd st , Brooklyn, NY, 11204  
(718)236-8000  
Warning  
Safety automatic lock  
Unlock cord  
This product contains small items that could be a choking hazard if swallowed. Keep  
these items away from young children!  
1.Make sure these instructions are read and completely understood before attempting  
installation. If you are unsure of any part of this installation, contact a professional  
installer for assistance.  
www.pyleaudio.com  
CAUTION  
This product was designed to be installed on wood stud walls and solid concrete walls.  
Before installing make sure the supporting surface will support the combined load of the  
equipment and hardware. Never exceed the Maximum Load Capacity. This product is  
intended for indoor use only. Use of this product outdoors could lead to product failure or  
personal injury.The depth of this mount(1.3") may not provide sufficient space for proper  
ventilation on some screens. Please refer to the manufacturer’s requirements for mounting  
your screen befourinstallation.  
2.The wall or mounting surface must be capable of supporting the combined weight of  
the mount and the display; otherwise the structure must be reinforced.  
3.Safety gear and proper tools must be used. A minimum of two people are required  
for this installation. Failure to use safety gear can result in property damage, serious  
injury or death.  
-8-  
 
Part 3-Atttachingg bbrackets tto screen  
Part 1aa-Wood SStud Moouunting  
Center brackets vertically on back of screen. Select the small(A),medium  
(B or C) or large(D) screws. Attach brackets to screen using four selected  
screws and four square washers(E) at the top and bottom of each bracket.  
Tighten screws firmly. Do not overtighten.  
Use wall plate(1) as a template, make sure it is level, and mark four mounting  
holes along the center lines of the wood studs. Drill four 3/16(5mm)dia.  
holes 2(50mm) deep. Level wall plate(1) and attach to wall with four long  
bolts(G) and four washers(F). Tighten screws firmly. Do not overtighten.  
2(50mm)  
Square washer(E)  
E
Large hole for  
M8 screws  
A-D  
Φ3/16(5mm)  
Medium hole for  
M5 and M6 screws  
Small hole for  
M4 screws  
Stud finder  
Wood stud  
Magnetic removable  
bubble level  
F
G
-3-  
-6-  
 
Part 1b--Concrette Wall MMoounting  
Part 2-Atttachiing pllaastic coveers to wall plate  
Level wall plate(1) and use wall as a template to mark four holes. Drill four  
3/8(10mm) dia. holes 2(50mm) deep. Insert four anchors(H) into holes  
and secure wall plate with four long bolts(G) and four washers(F).Tighten  
screws firmly. Do not overtighten.  
Secure plastic covers over wall plate by pushing them toward each other  
until they lock in place.  
5
2(50mm)  
Φ3/8(10mm)  
Concrete Wall  
If you think the ribbon is too long, You can hide it at the back of the  
televesion,once you want to uninstall the TV, it can help you to take out the  
brackets.  
Magnetic removable  
bubble level  
F
G
3
-5-  
-4-  
 

Radio Shack Answering Machine TAD 739 User Guide
Radio Shack Surge Protector 61 2404 User Guide
RedMax Chainsaw GZ7000 User Guide
Reebok Fitness Treadmill RBTL09500 User Guide
RIDGID Water Pump TP 250 User Guide
Rolls Stereo Equalizer REQ313 User Guide
Ryobi Drill HP61 User Guide
Salton Pedicure Spa FM14B User Guide
Samsung Camcorder D365WI User Guide
Sennheiser Headphones HD 238 User Guide